My Toilet Flushes By Itself?

Toilet flush

Many homeowners have actually experienced a toilet that seems to flush by itself.

If this has actually ever occurred to you, you most likely questioned if you had to call a plumber or ghostbusters. It’s not so strange … simply an issue in the plumbing.

A toilet may flush by itself when the Douglas valve seal becomes deformed.

When this valve seal becomes deformed, the toilet tank will constantly leak water into the bowl and the fill sensors are set off that the toilet bowl is complete and has to be flushed.

This is the same principle as when you fill the toilet with containers of water. After a while, you’ll discover the toilet reaches a certain level and then instantly flushes itself.

My Toilet Flushes By Itself?

My Toilet Flushes By Itself?

To check if your toilet is leaking from the tank to the bowl, you should use the food-coloring test.

After flushing the toilet, add numerous drops of food coloring into the toilet bowl tank and wait about half an hour. If you see any traces of the food coloring in the toilet bowl water, then you know there is a leak. If the water is clear, there is no leak.

If you find the food coloring in the toilet bowl’s water, then you understand that the issue is dued to too much water leaking past the flapper and filling the toilet bowl. If this holds true, you will certainly have to have the flapper changed. The flapper valve is made of rubber and is extremely low-cost.

If you are unpleasant replacing this valve yourself, a regional plumber will be able to easily take care of the issue.

Facebook